Replacing A Fan Module - NEC DX2000 User Manual

Chapter 5 Replacing Modules
1.9

Replacing a Fan Module

Replace a fan module only when it is faulty.
1.9.1
Replacement
Follow the steps below to replace a fan module.
1. Refer to steps 1 to 3 in Chapter 5 (1.2 Overview of Replacing Modules) for preparations.
2. Locate the fan module you are going to replace.
3. Pinch the knob to pull out the fan module.
4. Pull out the fan module slowly by about 3 cm and wait for the revolution of the fan to slow down for a
while (about 10 seconds).
98
Important
• You must avoid static electricity to work with the procedure below. For details,
refer to "Handling precautions (for anti-static measures)".
• Use only a fan module authorized by NEC.
Scalable Modular Server DX2000 User's Guide
1. Replacing Internal Modules
Knob