Turning On Dc Of Server Modules - NEC DX2000 User Manual

Chatpter 3 Setup
5.

Turning on DC of Server Modules

This section describes how to turn on DC for any CPU module.
<For a Web browser>
Turn on DC from the Web console screen of BMC of the slot for which DC is turned on.
<For IPMI>
Turn on DC by sending an IPMI command to BMC of the slot for which DC is turned on.
# ipmitool -I lanplus -U Administrator -P Administrator -H <BMC_IP_Address> power on
72
Scalable Modular Server DX2000 User's Guide
5. Turning on DC of Server Modules