Chatpter 3 Setup
<To control this device en bloc from various tools>
User name:
Password:
3.2
Setting CSC module FW
When you logged in the management screen of the CSC modules, configure various settings as required.
Open the [Setting] tab to set the following items.
・[Network] - [Property]
Set the following items to change the network setting.
MAC address:
DHCP:
Dynamic DNS:
DNS server:
Host name:
Domain name:
Limitation type:
64
Mainte
Mainte
Important
Mainte account is used by tools such as system diagnostic management
●
tools and utilities to control the device en bloc.
●
Do not delete this account.
●
When you change this password, set the same password in the device to
be controlled.
Set this when you disabled DHCP. (Required)
Enable (Default)/Disable
Enable/Disable (Default) this when you enabled DHCP. (Required)
Set the IP address. (Default is 0.0.0.0.)
Set a host name.
Set a domain name.
Set a permission address/rejection address for access limitation.
Set no limitation (Default) for no access limitation.
Scalable Modular Server DX2000 User's Guide
3. Connection to CSC Modules