Management Features - NEC DX2000 User Manual

Chapter1 General Description
2.1

Management Features

The server modules and CSC modules (refer to Chapter 1, 3.5 and 3.6) in this server can be configured and
checked from a management terminal on the network, by using IPMI commands.
2.1.1
CSC modules
CSC modules are used to monitor and manage sensors (FAN, voltage, temperature and so on) of the chassis.
The management function provided by CSC modules is as follows.
Indication/setting item
Property
System
Power supply
SEL (System Event Log)
Sensor
Alert receiver
An example for using the ipmitool command is shown below.
For how to check the CSC's IP address refer to Chapter 3 (3.2 Obtaining IP Addresses for CSC module and
Switch Modules).
ipmitool -I lanplus -U Administrator -P Administrator –H [CSC IP address] [option]
IP address and MAC address
Firmware version
Displaying SEL information
Displaying sensor information
Checking the alert receiver
Turn on UID lamp
default setting of <interval> is 15 seconds.
Setting is "0", UID lamp turn off.
General information Information about items such as IP address, MAC address, and
firmware version
Information of field
Information about items such as boards
replaceable unit (FRU
information)
Information about items such as UID LED and time
Control the power supplied to all server modules in the chassis
in a batch and check their status.
Indicates SEL information.
Indicates sensor information.
Used to specify the alert receivers.
Item
lan print
mc info
sel list
sensor
lan alert print
chassis identify<interval>
Scalable Modular Server DX2000 User's Guide
Description
*1
*1
and chassis
option
Command execution example (
2. Standard Features
*1
)
21