Power Supply Unit - NEC DX2000 User Manual

Chapter1 General Description
3.8

Power supply unit

(1) POWER LED
(2) Lock lever
(3) Handle
(1) POWER LED
The following table describes each AC POWER LED status and its meaning.
AC POWER LED status
On (green)
Lighting in amber
Flashing (amber)
Light off
(2) Lock lever
Press the lever to unlock it when you pull out the power unit.
(3) Handle
Press the lock lever (2) and hold this handle to pull out the power unit.
38
Description
The server is on.
The power cable is not connected to the power
supply unit due to redundant power configuration.
The power unit is faulty.
The AC power is not supplied.
Scalable Modular Server DX2000 User's Guide
3. Names and Functions of Parts
Action to take
－
Connect the power cable.
Replace the failed power supply unit.
Check if the power cable is connected and
the AC power is supplied.