Securing The Maintenance Area - NEC DX2000 User Manual

Chapter 2 Installation and connection
1.1.2

Securing the maintenance area

Secure a maintenance area required for maintenance when you set a rack.
(1) Height direction
A work area is required on the top of the equipment when you do maintenance by drawing devices
mounted on the top of the rack. Secure at least 400mm from the top of the rack to the ceiling. When you
mount a device on the rack to maintain it from the top of the equipment, you need around 1000mm from
the top of the rack to the ceiling.
(2) Lateral direction
Secure a maintenance area at least 1000mm before and after the rack and 600mm or more on the right
and left side to perform maintenance from both sides with the equipment extracted.
or more
or more
Scalable Modular Server DX2000 User's Guide
Work area
or more
or more
or more
1. Installation
43