Chapter 3 Setup - NEC DX2000 User Manual

NEC Scalable Modular Server
DX2000
This chapter describes the setup of server.
1. Turning on the Server
This section describes how to put AC-ON for the server.
2. Preparation of Network Access
This section descries how to turn on DC of server module.
3. Connection to CSC Modules
This section describes how to connect to CSC Modules.
4. Connection to BMC
This section describes how to set BMC firmware.
5. Turning on DC of Server Modules
This section describes how to set the CSC module firmware.
6. System BIOS Setup (Description of SETUP)
This section describes how to set BIOS.
7. Installing OS
This section describes how to install OS
8. Turning Off the Server
This section describes how to turn off the server.
9. DX2000 Utility Disk
This section describes how to use DX2000 Utility Disk.
Scalable Modular Server DX2000 User's Guide
Setup
57