Server Module - NEC DX2000 User Manual

Chapter1 General Description
3.5

Server Module

Ejector
Switch
(1) POWER
The switch to turn on/off the server module
unit.
The power is tuned on/off coupled with the
10G LAN module and the PCI card when
they constitute the server.
(2) BMC RESET Switch
The switch to reset BMC of the server module.
The server monitoring function stops until BMC
has been initialized after resetting
(6) Status LED
(1) POWER switch
(2) BMC RESET switch
Scalable Modular Server DX2000 User's Guide
3. Names and Functions of Parts
(5) POWER LED
(7) UID LED
(4) Micro USB connector
(for maintenance only)
(3) UID switch
(3) UID(Unit ID) Switch
The switch to turn on/off the UID lamp
Press the switch once to turn on the UID lamp.
Press it again to turn it off.
The UID lamp is lit by a command from the
software.
) Micro USB Connector
(4
Exclusively used for maintenance
Do not use this.
31