Screen Capture Function - Icom IC-7610 Advanced Manual

11. OTHER FUNCTIONS

Screen Capture function

You can capture the transceiver display onto an
SD card or a USB lash drive. Most of the screens
used in this manual are captured using this function.
However, some screens cannot be captured.
D Setting the Screen Capture function
1. Display the "Screen Capture [POWER] Switch"
screen.
» SET > Function >
MENU
Screen Capture [POWER] Switch
2. Touch "ON" to turn ON the Screen Capture
function.
3. Touch "Screen Capture Storage Media" to select
"SD Card" or "USB Flash Drive" to save the
captured screens.
» SET > Function >
MENU
Screen Capture Storage Media
4. Touch "Screen Capture File Type" to set the
screen capture file type to "PNG" or "BMP."
» SET > Function >
MENU
Screen Capture File Type
TIP: You can also assign the Screen Capture
function to the [Print Screen] key on the USB
keyboard.
SET > Function >
»
MENU
Screen Capture Keyboard [Print Screen]
D Capturing a screen
1. Display the screen that you want to capture.
2. Push POWER .
• "SCREEN CAPTURE Completed" is displayed.
L If the "Screen Capture Keyboard [Print Screen]" is
set to ON, push [Print Screen] on the keyboard.
D Viewing a captured screen
1. Display the SCREEN CAPTURE VIEW screen.
» SET > SD Card > Screen Capture View
MENU
» SET > USB Flash Drive > Screen Capture View
MENU
• The capture screen list is displayed.
• The latest screen capture is at the top of the list.
2. Touch the screen capture to view.
• The indicator on the
screen capture.
L You can view the next screen capture
by rotating MULTI
To display the ile information or delete captured
screens,
While selecting a ile on the SCREEN CAPTURE
VIEW screen, push
3. To close the SD CARD or USB FLASH DRIVE
screen, push
EXIT
83
key blinks while viewing a
NR
.
.
QUICK
several times.