Clearing A Memory Channel - Icom IC-7610 Advanced Manual

7. MEMORY OPERATION

Clearing a memory channel

You can clear a no-longer-used memory channel and
reset it as a blank channel, except for the program
channels (P1 and P2).
1. Select the Main band or Sub band.
(Example: Main band)
2. Select the Memory mode.
3. Rotate to select the channel to clear.
MULTI
(Example: Memory channel 3)
The memory channel to clear
4. Touch [M-CLR] for 1 second.
Cleared
5. To close the VFO/MEMORY screen, push
About the MEMORY screen
q
q Memory channel number
Displays the memory channel number.
L "P1" or "P2" is displayed for the Scan Edge
memory channels.
Memory select icon
Touch this icon to set the select number "1,"
"2," "3" or OFF.
L You can also touch the icon for 1 second to display
the SELECT ALL CLEAR screen, and then select the
item to reset the select number.
w Frequency/Operating mode/IF ilter
Displays the entered frequency, selected operating
mode, and the IF ilter.
e Memory name
Displays the memory name, if entered.
LSee the previous for details.
r Memory menu
Touch to display the MEMORY MENU.
L You can select between "Edit Name," "Memory Write"
and "Memory Clear".
t [▲] and [▼]
Touch to scroll through the Memory channels.
.
EXIT
About the QUICK MENU
While selecting a memory channel with memory
contents, push
where you can select
Write," "Memory Clear," and "SELECT All Clear."
64
w e
to display the QUICK MENU,
QUICK
"SELECT," "Edit Name," "Memory
r
t