Operating Rtty (Fsk) - Icom IC-7610 Advanced Manual

2. ADVANCED OPERATIONS
Operating RTTY (FSK) (Continued)
D Transmitting an RTTY memory content
You can transmit the preset characters on the RTTY
MEMORY screen.
L You can edit the characters by touching [EDIT] on the
RTTY MEMORY screen.
1. Display the RTTY DECODE screen in the RTTY
mode.
» DECODE
MENU
L The PSK mode screen differs slightly from the
RTTY mode.
2. Touch [TX MEM].
3. Touch an RTTY memory between [RT1] and
[RT8] to transmit.
(Example: RT1)
Lights red
Transmitting contents are displayed.
• The TX status indicator lights red and the Po meter
swings.
L To cancel the transmission and to return to the RTTY
DECODE screen, push
LAfter transmitting, automatically returns to receive.
.
EXIT
Memory Title
MYCALLx2 ↵ DE ICOM ICOM K ↵
RT1
MYCALLx3 ↵ DE ICOM ICOM ICOM K ↵
RT2
QSLUR599 ↵ QSL UR 599–599 BK ↵
RT3
RT4 DE+UR599
RT5 73 GL SK
RT6 CQ CQ CQ
RT7 RIG&ANT
RT8 EQUIP.
When a keyboard is connected:
• You can transmit the preset contents in the RTTY
memory (RT1 ~ RT8) by pushing [F1] ~ [F8] on the
USB keyboard.
After transmitting the contents, you can directly
enter an RTTY message on the keyboard, and
then push [F12] to transmit.
To return to receive, push [F12] again.
• If the Auto TX/RX function is set to "OFF" or
"AUTO RX" (p. 20), you can display the preset
contents on the RTTY DECODE screen, and then
transmit it by pushing [F12] on the keyboard.
• You can transmit the preset contents in the RTTY
memory (RT1 ~ RT8) from an external device by
setting the "External Keypad," and then connecting
an external keypad to [MIC] or [EXT KEYPAD] on
the IC-7610.
» SET > Connectors > External Keypad
MENU
19
Preset characters by default
↵ QSL DE ICOM ICOM UR 599-
599 BK ↵
↵ 73 GL SK ↵
↵ CQ CQ CQ DE ICOM ICOM
ICOM K ↵
↵ MY TRANSCEIVER IS IC-7610
& ANTENNA IS A 3–ELEMENT
TRIBAND YAGI. ↵
↵ MY RTTY EQUIPMENT
IS INTERNAL FSK UNIT &
DEMODULATOR OF THE IC-7610. ↵