Maintenance - Icom IC-7610 Advanced Manual

12. MAINTENANCE (ADVANCED)
Cleaning
DO NOT use harsh solvents such as
benzine or alcohol when cleaning,
because they will damage the
transceiver surfaces.
Replacing fuse
If a fuse blows, or the transceiver stops functioning,
ind and repair the cause of the problem. Then
replace the damaged fuse with a new, adequately
rated fuse.
L Spare fuses are supplied with the transceiver.
The fuses are installed in the DC power cable and in
the inside circuitry, to protect the transceiver.
• DC power cable fuses ................................ ATC 30 A
• Circuitry fuse ................................................ ATC 5 A
R
WARNING!
• Disconnect the DC power cable from the transceiver
before replacing the fuse.
• NEVER use fuses that are not speciied.
If the transceiver becomes dusty or dirty,
wipe it clean with a dry, soft cloth.
D DC power cable fuses
See the following illustration to replace the DC power
cable fuses.
85
ATC 30 A fuse