Repeatedly Transmitting - Icom IC-7610 Advanced Manual

5. VOICE TX MEMORY OPERATION
Transmitting a Voice memory content (Continued)
D Repeatedly transmitting
1. Display the VOICE TX screen.
» VOICE
MENU
2. Touch a Voice TX memory key [T1] ~ [T8] for 1
second.
• Repeatedly transmits the recorded content.
The SD card indicator located next to
Transmitting
the card slot blinks while transmitting.
Repeat icon The transmission's remaining time
L
Information
• The recorded content is repeatedly transmitted for
10 minutes, unless you manually stop transmission
by touching the selected memory.
• You can set the pause interval between the
repeated transmissions in the "Repeat Time" item
on the VOICE TX SET screen. During this interval,
the transceiver returns to receive. (p. 54)
• After 10 minutes have passed, and all of the
recorded content in the memory is transmitted, the
transceiver automatically returns to receive.
• When a signal is received in the interval between
transmissions, the transceiver pauses the next
transmission until the signal disappears. However,
if the squelch is set to open, the transceiver
repeatedly transmits after the repeat interval time
expires, even signals are received.
3. To close the VOICE TX screen, push
TIP:
If the "DATA OFF MOD" is set to "ACC," "USB" or "LAN,"
Voice TX memories can not be transmitted.
» SET > Connectors > MOD Input >
MENU
DATA OFF MOD
D Adjusting the output level
Adjust the Voice TX memory level.
1. Display the VOICE TX screen
MENU
2. Touch [TX LEVEL].
3. Touch any Voice memory key other than [T4] or
[T8]. ([T1] ~ [T3] or [T5] ~ [T7])
• The transceiver automatically transmits.
L To adjust the Transmit voice level for [T4] and [T8],
reverse steps 2 and 3.
4. While transmitting, rotate
transmit voice level.
L Adjusting the level too high may result in over
modulation, and transmit signal distortion.
5. To close the VOICE TX screen, push
several times.
.
EXIT
53
.
» VOICE
MAIN DIAL
Rotate
Touch for 1 second to reset to the default setting
MAIN DIAL
to adjust.
to adjust the
EXIT