Installation - Endress+Hauser Proline Prosonic Flow 93T Portable Operating Instructions Manual

Proline Prosonic Flow 93T Portable
2

Installation

2.1 Installation conditions
2.1.1 Dimensions
For the dimensions of the measuring device, see the associated Technical Information on the
CD-ROM.
Mounting location
Correct flow measurement is possible only if the pipe is full. Entrained air or gas forming in the
pipe can result in an increase in measuring errors. For this reason avoid the following mounting
locations in the pipe:
• Highest point of a pipeline. Risk of air accumulating.
• Directly upstream of a free pipe outlet in a vertical pipeline.
Endress+Hauser
Installation
A0001103
5