B Printer Options; Hardware Options - Printronix SL4M User Manual

B
Options are offered with the printer to enhance its capabilities and to provide a
large degree of application flexibility. A description of the option complement
is given below. Field installable options include installation instructions.

Hardware Options

Media Cutter
The printer may be ordered with a cutter mechanism installed (for cutting tags
and label liner), or the option can be field installed by the user at a later date.
Once installed, the printer can be configured to automatically cut media after
each label or after a specified number of labels is printed.
NOTE: The Cutter option is not supported when the Full Media Rewinder or
Full Media Rewinder
In batch rewind mode, rewinds printed labels into a removable roll or a 3 inch
diameter media take-up core. The printer may be ordered with this option
installed or it can be field installed at a later date by an authorized service
representative.
Standard Peel with Liner Rewinder
In label peel-off mode, peels off labels one at a time before printing the next
label and rewinds the liner into a discardable roll. The printer may be ordered
with this option installed or it can be field installed by an authorized service
representative at a later date.
Standard Peel
This option provides the ability to peel labels while discarding the dispensed
liner in front of the printer. This option may be field installed by the user at a
later date.
Printer Options
either Standard Peel option is installed.
227