Update Firmware - ICP DAS USA RS-232 Quick Start Manual

9. Update Firmware

Users can set the DIP switch to Update Firmware mode (refer to the
section 6) and reboot the I-7590 for updating the firmware of the I-7590. In this
case, the three LED, PWR, MTX, MRX are all always turn on. Users need to
connect the PC COM port with the RS-232 port of the I-7590 and use the
"FW_Update_Tool" tool to update the firmware. The "FW_Update_Tool" tool
can be downloaded from the ICP DAS web
site: http://ftp.icpdas.com.tw/pub/cd/fieldbus_cd/mbus/converter/i-
7590/software/
Please follow the steps to accomplish the firmware update of the I-7590.
(1) Choose the correct COM port on PC that connects to the I-7590.
(2) Click the "Browser..." button to choose the I-7590 firmware file such as
I7590_vx.xx.fw.
(3) Click "Firmware Update" button to start the firmware update process.
(4) After firmware update successes, switch the DIP to normal run mode and
reboot the I-7590. The I-7590 will execute with new firmware.
I-7590 RS-232/422/485 to M-Bus Convertor - QuickStart (Mar/2017)
ICP DAS USA, Inc. | www.icpdas-usa.com
CA 90717
| 1-310-517-9888 | 24309 Narbonne Ave. Suite 200. Lomita,
8