Firmware Operation Mode - ICP DAS USA I-7565-H1 User Manual

the below steps to complete the firmware updating process.
[1] Choose "USB" interface and "USB Disk".
[2] Click "Browser" button to choose firmware file. (like I7565H1_v1.01.fw)
[3] Click "Firmware Update" button to start firmware updating process.
The result will show in "Firmware Update" field.
The Firmware_Update_Tool program can be downloaded from
http://ftp.icpdas.com/pub/cd/fieldbus_cd/can/converter/i-7565-
h1h2/software/tool

2.5.2 Firmware Operation Mode

In operation mode, users need to set the dip-switch to the "Normal"
position like Figure 2-12 and turn the power off then on again so that the I-
7565-H1/H2 can run in the operation mode. In this mode, users can send /
receive CAN messages via PC USB port.
I-7565-H1/H2 High Performance USB/CAN Converter User's Manual (Ver 1.7, Aug/2011) ------------- 13
Figure 2-11: Normal Position of Dip-Switch