Table of Contents
Advertisement
Figure 19. Installing the air shroud
Next steps
Follow the procedure listed in
Cooling fans
Removing a cooling fan
Prerequisites
1. Follow the safety guidelines listed in the
2. Follow the procedure listed in
3.
Remove the air
shroud.
4. Move the cables out of way to access the fan cable connector on the system board.
NOTE:
Observe the fan cable routing or make a note on the fan cable routing.
Steps
1. Disconnect the cooling fan cable connected to the fan dongle cable.
2. Holding the blue tab, lift the cooling fan out of the fan cage.
After working inside your
Safety
instructions.
Before working inside your
system.
system.
Installing and removing system components
35
Advertisement
Table of Contents
