View Menu; Nic Indicator Codes - Dell PowerEdge R650XS RD8NP Installation And Service Manual

Table 44. Setup menu
Option Description
iDRAC Select DHCP or Static IP to configure the network mode. If Static IP is selected, the available fields
are IP, Subnet (Sub), and Gateway (Gtw). Select Setup DNS to enable DNS and to view domain
addresses. Two separate DNS entries are available.
Set error Select SEL to view LCD error messages in a format that matches the IPMI description in the SEL. This
enables you to match an LCD message with an SEL entry. Select Simple to view LCD error messages in
a simplified user-friendly description. For information about the event and error messages generated by
the system firmware and agents that monitor system components, go to
Code, type the error code, and then click Look it up..
Set home Select the default information to be displayed on the Home screen. See
and option items that can be set as the default on the Home screen.

View menu

NOTE: When you select an option in the View menu, you must confirm the option before proceeding to the next action.
Table 45. View menu
Option
iDRAC IP
MAC
Name
Number
Power
Temperature

NIC indicator codes

Each NIC on the back of the system has indicators that provide information about the activity and link status. The activity LED
indicator indicates if data is flowing through the NIC, and the link LED indicator indicates the speed of the connected network.
Figure 136. NIC indicator codes
1. Link LED indicator
2. Activity LED indicator
Table 46. NIC indicator codes
NIC indicator codes
Link and activity indicators are off.
Description
Displays the IPv4 or IPv6 addresses for iDRAC9. Addresses include DNS (Primary and
Secondary), Gateway, IP, and Subnet (IPv6 does not have Subnet).
Displays the MAC addresses for iDRAC, iSCSI, or Network devices.
Displays the name of the Host, Model, or User String for the system.
Displays the Asset tag or the Service tag for the system.
Displays the power output of the system in BTU/hr or Watts. The display format can be
configured in the Set home submenu of the Setup menu.
Displays the temperature of the system in Celsius or Fahrenheit. The display format can
be configured in the Set home submenu of the Setup menu.
Condition
Indicates that the NIC is not connected to the network.
qrl.dell.com
View menu
System diagnostics and indicator codes
> Look Up > Error
section for the options
137