Table of Contents
Advertisement
6 INSTALLATION
EC Directive 89/336/EEC
In order to meet the requirements of the EC
Directive 89/336/EEC for EMC regulations, this
product must not be used in a non-industrial
environment.
End of Life Disposal
This instrument does not contain any substance
that will cause undue harm to the environment.
However, the unit contains a small lithium battery.
This should be removed and disposed of
responsibly
in
accordance
environmental regulations. The remainder of the
unit can be safely considered as normal waste and
disposed of accordingly.
6.1 Mechanical Installation
6.1.1 Siting – Figs. 6.1 and 6.2
A – Close to Sensor
B – At Eye-level Location
C – Avoid Vibration
Fig. 6.1 General Requirements
82
with
Minimum
Sensor
A – Within Temperature Limits
local
C – Within Protection Rating Limits
from strong electrical and magnetic
fields. If these cannot be avoided,
particularly in applications where 'walkie
talkies'
screened cables within grounded metal
conduit.
Fig. 6.2 Environmental Requirements
55°C
Max.
0°C
Min.
0 to 90% RH
B – Within Humidity Limits
IP66/
NEMA4X
(front panel)
IP20
(rear)
+
Caution. Select a location away
are
used,
connect
D – Use Screened Cables
using
Advertisement
Table of Contents
