Relays - ABB COMMANDER 360 User Manual

6.3 Relays

Note. Refer
Table B for default relay assigments.
Relay contacts are rated at:
115/230V a.c. at 5A (non-inductive)
250V d.c. 25W max.
6.3.1 Setting the Relay Links – Fig. 6.9
Set the links on the option board (if fitted).
to the Rear Fold-out/
Normally closed
Normally open
LK3 = Relay 3
LK4 = Relay 4
LK3
LK4
Note. The default setting for the relay links is 'Normally Open' (N/O).
Fig. 6.9 Relay Links
6 INSTALLATION...
6.4 Digital Output
15V d.c. min. at 20mA
Min. load 750Ω
6.5 Control or Retransmission
Analog Output
Max. load 15V (750Ω at 20mA).
Isolated from analog input, dielectric strength
500V for 1 minute.
89