...5 CONFIGURATION MODE
...5.5 Level 9 – Set Point Configuration
9. . 0 8
L. S r1
OFF
9. . 0 9
L. S r2
OFF
9. 1 0
L. S r3
OFF
9. 1 1
L. S r4
OFF
LEV9
SEt. P
•1
A digital input becomes active when a volt-free contact is closed or a low TTL signal is applied.
•2
Local Set Point 1 is selected automatically when a profile program is running. No other local set point can be
selected until the profile program is stopped.
64
Local Set Point Source 1
The source required to select local set point 1 (LSP1) as the current local
set point.
See Rear Fold-out/
Table D – Digital Sources.
Local Set Point Source 2
The source required to select local set point 2 (LSP2) as the current local
set point.
See Rear Fold-out/
Table D – Digital Sources.
Local Set Point Source 3
The source required to select local set point 3 (LSP3) as the current local
set point.
See Rear Fold-out/
Table D – Digital Sources.
Local Set Point Source 4
The source required to select local set point 4 (LSP4) as the current local
set point.
See Rear Fold-out/
Table D – Digital Sources.
Return to top of
Set Point Configuration
9.08...9.11
LSP1
LSP2
LSP3
LSP4
page.
•1
•2
•1
•2
•1
•2
•1
•2