Table of Contents
Advertisement
...6 INSTALLATION
...6.1.2 Mounting – Figs. 6.3 to 6.5
84
3
Fit the panel clamps, ensuring that the
3
lugs are located correctly in their slots
Secure the panel clamp using the retaining screws.
4
The rubber friction sleeve prevents over-tightening.
Fig. 6.4 Mounting
Cut a hole in the panel
1
(see Fig. 6.3 for dimensions).
Instruments may be close
stacked to DIN 43835
Insert the instrument
2
into the panel cut-out
Advertisement
Table of Contents
