ABB RER620 Technical Manual page 40

Section 3
Basic functions
Table 11: Binary input: Non group settings
Parameter Values (Range)
Threshold voltage 18...176
Input osc. level 2...50
Input osc. hyst 2...50
Table 12: Ethernet front port: Non group settings
Parameter Values (Range)
IP address
Mac address
Table 13: Ethernet rear port: Non group settings
Parameter Values (Range)
IP address
Subnet mask
Default gateway
Mac address
Table 14: General system: Non group settings
Parameter Values (Range)
Rated frequency 1=50Hz
2=60Hz
Phase rotation 1=ABC
2=ACB
Blocking mode 1=Freeze timer
2=Block all
3=Block trip
Bay name
SG follow input 0=False
1=True
Phase Order Mode 1=ABC
2=BCA
3=CAB
4=ACB
5=CBA
6=BAC
34
Unit Step Default
Vdc 2 48
events/s 1 30
events/s 1 10
Unit Step Default
192.168.0.254
XX-XX-XX-XX-XX-XX
Unit Step Default
192.168.2.10
255.255.255.0
192.168.2.1
XX-XX-XX-XX-XX-XX
Unit Step Default
2=60Hz
1=ABC
1=Freeze timer
RER620
0=False
1=ABC
When the Phase Order Mode setting is changed, the relay must be rebooted
to activate the new setting.
Description
Digital input threshold voltage
Digital input oscillation suppression threshold
Digital input oscillation suppression hysteresis
Description
IP address for front port (fixed)
Mac address for front port
Description
IP address for rear port(s)
Subnet mask for rear port(s)
Default gateway for rear port(s)
Mac address for rear port(s)
Description
Rated frequency of the network
Phase rotation order
Behavior for function BLOCK inputs
Bay name in system
Enable setting group change to follow the input state
Selection for phase correction order
1MAC309294-MB F
RER620
Technical Manual