ABB RER620 Technical Manual page 42

Section 3
Basic functions
Table 17: DNP3: Non group settings
Parameter Values (Range)
DNP physical layer 1=Serial
2=TCP/IP
3=Both
Unit address 1...65519
Master address 1...65519
Serial port 0=Not in use
1=COM 1
2=COM 2
Need time interval 0...65535
Time format 0=UTC
1=Local
CROB select timeout 1...65535
Data link confirm 0=Never
1=Only Multiframe
2=Always
Data link confirm TO 100...65535
Data link retries 0...65535
Data link Rx to Tx delay 0...255
Data link inter char delay 0...20
App layer confirm 1=Disable
2=Enable
App confirm TO 100...65535
App layer fragment 256...2048
UR mode 1=Disable
2=Enable
UR retries 0...65535
UR TO 0...65535
UR offline interval 0...65535
UR Class 1 Min events 0...999
UR Class 1 TO 0...65535
UR Class 2 Min events 0...999
UR Class 2 TO 0...65535
UR Class 3 Min events 0...999
UR Class 3 TO 0...65535
Legacy master UR 1=Disable
2=Enable
Legacy master SBO 1=Disable
2=Enable
Default Var Obj 01 1...2
Default Var Obj 02 1...2
Default Var Obj 30 1...4
Default Var Obj 32 1...4
36
Unit Step Default
2=TCP/IP
1 1
1 3
0=Not in use
min 1 30
1=Local
sec 1 10
0=Never
ms 1 3000
1 3
ms 1 0
char 1 4
1=Disable
ms 1 5000
bytes 1 2048
1=Disable
1 3
ms 1 5000
min 1 15
1 2
ms 1 50
1 2
ms 1 50
1 2
ms 1 50
1=Disable
1=Disable
1 1
1 2
1 2
1 4
Description
DNP physical layer
DNP unit address
DNP master and UR address
COM port for serial interface, when physical layer is serial.
Period to set IIN need time bit
UTC or local. Coordinate with master.
Control Relay Output Block select timeout
Data link confirm mode
Data link confirm timeout
Data link retries count
Turnaround transmission delay
Inter character delay for incoming messages
Application layer confirm mode
Application layer confirm and UR timeout
Application layer fragment size
Unsolicited responses mode
Unsolicited retries before switching to UR offline mode
Unsolicited response timeout
Unsolicited offline interval
Min number of class 1 events to generate UR
Max holding time for class 1 events to generate UR
Min number of class 2 events to generate UR
Max holding time for class 2 events to generate UR
Min number of class 3 events to generate UR
Max holding time for class 3 events to generate UR
Legacy DNP master unsolicited mode support. When
enabled relay does not send initial unsolicited message.
Legacy DNP Master SBO sequence number relax enable
1=BI; 2=BI with status.
1=BI event; 2=BI event with time.
1=32 bit AI; 2=16 bit AI; 3=32 bit AI without flag; 4=16 bit AI
without flag.
1=32 bit AI event; 2=16 bit AI event; 3=32 bit AI event with
time; 4=16 bit AI event with time.
1MAC309294-MB F
RER620
Technical Manual