Power And Three-Phase Calculations - AEMC 8220 User Manual

4.6.2

Power and Three-Phase Calculations

First Function: POWER MODE
There are 12 pages in this mode. Use the ◄► buttons to move through them.
1st and 2nd Pages:
ITEM
1.
Active power (W)
2.
Reactive power (VAR)
3.
Apparent power (VA)
4.
*The powers displayed are the total powers (sum of 3 phases) if the
**The total continuous power (WDC) is not shown if the
Power Quality Analyzer Model 8220
Figure 4-12
1st Page*
# of page displayed / total # of pages
2nd Page**
Continuous power (WDC)
Power factor (PF)
Displacement factor (DPF, also noted as Φ)
symbol is displayed.
1
2
3
4
symbol is displayed.
37