Delete Button - AEMC 8220 User Manual

To Display Pages of a Photograph:
After selecting the pages of a photograph as previously described, press the
button.
During the time that the photograph is being viewed, the
bottom right-hand corner of the display.
To view the different pages:
• Select a function -
• Use the white and yellow buttons (
• Use the ◄► buttons to navigate around the different pages of the
selected mode.
To return to the list of photographs, press the
2.6.3

Delete Button

This button is used to delete one or all of the previously saved photographs.
To Delete a Photograph:
Press the button to view the list of photographs.
Use the ◄► buttons to:
• Display the number of a specific photograph to be deleted (see illustration
on previous page).
• Select
Press the button to delete the selected photograph.
WARNING: Selecting
After deleting a specific photograph, one of the numbers of the remaining photo-
graphs is displayed.
If the list does not contain any further photos, the display indicates
recording). The display then switches automatically to a measurement mode.
This list can be exited by pressing either the White or Yellow button (
or button, or by changing the position of the switch.
If was selected,
matically switches to a measurement mode.
Power Quality Analyzer Model 8220
,
to select all photographs.
will delete all saved photographs.
is displayed on the screen. The display then auto-
or on the rotary switch.
) to select a mode.
button again.
icon flashes in the
(no
) or the
15