AEMC 8220 User Manual page 34

Parameter
Page 4:
The symbol means secondary.
This parameter configures the primary current of the transformation ratio (
NOTE: This screen is only displayed if the Model 8220 is connected to a 5A
adapter or to the MN193 5A clamp. For all of the other sensors, which do not
require any adjustment, this screen is not displayed:
The parameter defines the value of the secondary effective current for the MN193
clamp (5A) or the 5A adapter.
The value is set using the White and Yellow (
are 1 and 5A.
This parameter configures the range of the Model 8220.
This SL261 screen is displayed only if the Model 8220 is connected to an SL261
probe (AC/DC)
Display of the parameter concerning the sensitivity used by the probe
32
Figure 4-5
Display of the effective secondary current.
Figure 4-6
) buttons. The preset values
Power Quality Analyzer Model 8220
).