Headlight Switch - Renault ALASKAN 2017 Driver's Handbook Manual

HEADLIGHT AND TURN SIGNAL
SWITCH

HEADLIGHT SWITCH

RENAULT recommends that you consult the local
regulations concerning the use of lights.
AUTO position
When the ignition switch is in the ON position and
the headlight switch is in the <AUTO> position, the
headlights, front clearance lights, instrument panel
lights, rear combination lights and other lights turn
on automatically depending on the brightness of the
surroundings.
The headlights will turn on automatically at twilight
or in rainy weather (when the windscreen wiper is
operated continuously).
When the ignition switch is placed in the OFF posi-
tion, the lights will turn off automatically.
CAUTION
Do not place any objects on top of the brightness
sensor. The sensor senses the brightness level
and controls the autolight function. If the sensor
is covered, it reacts as if it is dark, and the head-
lights will illuminate.
m position
The position turns on the front clearance, in-
strument panel, tail and number plate lights.
NIC2765
m position
The position turns on the headlights in addition
to the other lights.
Headlight beam
To turn on the high beam, push the lever towards
the front position .
To turn off the high beam, return the lever to the
neutral position .
To flash the headlights, pull the lever towards the
rearmost position . The headlights can be flashed
even when the headlights are not on.
Friendly lighting (where fitted):
When the lever is pulled towards the rearmost posi-
tion after the ignition switch is placed in the OFF
or LOCK position, the headlights will turn on and
stay on for 30 seconds. Each time the lever is pulled
towards the rearmost position 30 seconds are
added to the timer.
The lever can be pulled up to 4 times for 2 minutes
of illumination.
Daytime running light system
(where fitted)
Even if the headlight switch is in the OFF position,
the daytime running lights will come on after starting
the engine.
When the light switch is turned to the
position, the daytime running light will turn off.
NIC2914
Instruments and controls
or
2-31