Renault ALASKAN 2017 Driver's Handbook Manual page 156

Heater operation
Heating:
This mode is used to direct heated air from the foot
outlets.
1. Push the air recirculation
heating. (The indicator light will turn off.)
2. Turn the air flow control dial to the
3. Turn the fan speed control
sired position.
4. Turn the temperature control dial to the desired
position between the middle and the hot (right)
position.
Ventilation:
This mode directs outside air from the side and
centre vents.
1. Push the air recirculation
cator light will turn off.)
2. Turn the air flow control dial to the
3. Turn the fan speed control
sired position.
4. Turn the temperature control dial to the desired
position.
Defrosting or defogging:
This mode directs the air to the defogger outlets to
defrost/defog the windows.
1. Turn the air flow control dial to the
4-24
Display screen, heater and air conditioner, and audio system
2. Push the air recirculation
cator light will turn off.)
3. Turn the fan speed control
sired position.
4. Turn the temperature control dial to the desired
button for normal
position between the middle and the hot (right)
position.
position.
•
To remove frost from the windscreen quickly,
dial to the de-
turn the temperature control dial to the maximum
position and the fan speed control
the maximum position.
•
If it is difficult to defog the windscreen, turn the
A/C button on.
Bi-level heating:
This mode directs cool air from the side and centre
vents and warm air from the foot outlets. When the
temperature control dial is turned to the maximum
button. (The indi-
hot or cool position, the air between the vents and
the foot outlets is the same temperature.
position.
1. Push the air recirculation
dial to the de-
cator light will turn off.)
2. Turn the air flow control dial to the
3. Turn the fan speed control
sired position.
4. Turn the temperature control dial to the desired
position.
position.
button. (The indi- Heating and defogging:
This mode heats the interior and defogs the win-
dows.
dial to the de-
1. Push the air recirculation
cator light will turn off.)
2. Turn the air flow control dial to the
3. Turn the fan speed control dial to the desired
position.
4. Turn the temperature control dial to the maximum
dial to
hot (right) position.
Air conditioner operation
The air conditioner system should be operated for
approximately 10 minutes at least once a month.
This helps prevent damage to the air conditioner
system due to the lack of lubrication.
Cooling:
This mode is used to cool and dehumidify the air.
1. Push the air recirculation
button. (The indi-
cator light will turn off.)
2. Turn the air flow control dial to the
position.
3. Turn the fan speed control dial to the desired
dial to the de-
position.
4. Push the A/C button on. (The A/C indicator light
will illuminate.)
5. Turn the temperature control dial to the desired
position between the middle and the cool (left)
position.
button. (The indi-
position.
button. (The indi-
position.