Headlight Beam Adjustment - Renault MEGANE E-TECH 100% ELECTRIC 2022 User Manual

HEADLIGHT BEAM ADJUSTMENT

A
Depending on the vehicle, the A switch
can be used to adjust the height of the
headlight beams according to the load.
With the dipped beam headlights lit,
press or lift switch A as many times
as is necessary to select the required
position on the instrument panel. The
position selected is displayed on the
instrument panel for approximately
15 seconds.
Note: lights on, at each engine start-up
the selected position is displayed on
the instrument panel for approximately
15 seconds.
(1/2)
Driver alone or with front passenger
All seats occupied
Driver with passengers and luggage
(or load) reaching the maximum
permissible all-up weight
Driver without passengers and luggage
(or load) reaching the maximum
permissible all-up weight
The table below gives some examples. In all cases, adjust control A accord-
ing to the vehicle load so that the road can be seen and other drivers are not
dazzled.
Examples of positions for
adjusting
control A according to the load
0
1
2
3
1.119