Renault ALASKAN 2017 Driver's Handbook Manual page 78

See "Tyre Pressure Monitoring System (TPMS)
(where fitted)" in the "5. Starting and driving" sec-
tion.
Use the or and the <ENTER> buttons to start
or cancel the calibration process. While the calibra-
tion process is active, the message: [Resetting tyre
pressure system] will be displayed.
[Units]
The following items are available under the [Units]
menu.
•
[Distance/Fuel]
•
[Tyre Pressures] (where fitted)
•
[Temperature]
[Distance/Fuel]:
The unit for the distance and fuel consumption that
displays in the vehicle information display can be
changed to:
•
[km, l/100km]
•
[km, km/l]
•
[miles, MPG]
[Tyre Pressures] (where fitted):
The unit for tyre pressure that displays in the vehicle
information display can be changed to:
•
psi
•
bar
•
kPa
2-20
Instruments and controls
•
Kgf/cm 2
Use the or and the <ENTER> buttons to select
and change the unit.
[Temperature]:
The temperature that displays in the vehicle informa-
tion display can be changed from:
•
°C (Celsius)
•
°F (Fahrenheit)
[Language]
The language of the vehicle information display can
be changed to:
•
English
•
French
•
German
•
Italian
•
Portuguese
•
Dutch
•
Spanish
•
Turkish
•
Russian
Use the or and the <ENTER> buttons to select
and change the language of the vehicle information
display.
[Factory Reset]
The settings in the vehicle information display can
be reset back to the factory default. To reset the
vehicle information display:
1. Use the or buttons to select [Settings], and
press the <ENTER> button.
2. Select [Factory Reset] using the
and press the <ENTER> button.
3. Select [Yes] to return all settings back to default
by pressing the <ENTER> button.
To cancel the reset operation select [No] or press
the BACK button located on the left side of the
steering wheel.
or buttons