Renault ALASKAN 2017 Driver's Handbook Manual page 172

2. Turn the <MENU> dial clockwise or anticlock-
wise, the display will appear in the following or-
der:
[Audio] ⇔ [Clock] ⇔ [Radio] ⇔ [Language]
After the desired levels have been set, press either
the (Back) button repeatedly, or the <SETUP>
button.
Audio adjustments
1. Press the <SETUP> button to enter the setup
menu screen then select [Audio].
2. Turn the <MENU> dial clockwise or anticlock-
wise, the display will appear in the following or-
der:
[Sound] → [AUX in] → [Speed Volume] → [Bass
Boost] → [Audio Default]
4-40
Display screen, heater and air conditioner, and audio system
[Sound] menu:
Submenus in the sound menu:
[Bass] Use this control to enhance or
attenuate bass response sound.
Turn the <MENU> dial clockwise
or anticlockwise to adjust the bass
settings then press <ENTER> to
confirm.
[Treble] Use this control to enhance or
attenuate the treble.
Turn the <MENU> dial clockwise
or anticlockwise to adjust the
treble settings then press
<ENTER> to confirm.
[Balance] Use this control to adjust the bal-
ance of the volume between the
left and right speakers.
Turn the <MENU> dial
anticlockwise or clockwise to
adjust the left/right balance then
press <ENTER> to confirm.
[Fade] Use this control to adjust the bal-
ance of the volume between the
front and rear speakers.
Turn the <MENU> dial
anticlockwise or clockwise to
adjust the front/rear balance then
press <ENTER> to confirm.
[AUX in] menu:
Use this control to adjust the volume output from the
auxiliary source.
Turn the <MENU> dial anticlockwise or clockwise
to select [Low], [Medium], or [High] mode then
press <ENTER> to confirm.
[Speed Volume] menu:
This mode controls the volume output from the
speakers automatically in relation to vehicle speed.
When [Speed Volume] is displayed, turn the
<MENU> dial clockwise or anticlockwise to adjust
the volume level.
Adjusting the setting to 0 (zero) turns off the speed
volume feature. Increasing the speed volume setting
results in the audio volume increasing more rapidly
with vehicle speed. Once chosen, press <ENTER>
to save the setting.
[Bass Boost] menu:
Switch [Bass boost] [ON] or [OFF]
[Audio default] menu:
The audio unit has a saved preset settings as a fac-
tory default. Select [Yes] to change all settings back
to the factory preset settings. Select [No] to exit the
menu keeping the current settings.
Setting the clock
The clock menu screen set up screen will appear
when selecting the [Clock] item from the set up
menu.