Renault ALASKAN 2017 Driver's Handbook Manual page 95

To open a window, push down the power window
switch.
To close a window, pull up the power window
switch.
Driver's main window switch
The driver's switch, which is the main switch, can
control all of the windows.
Locking passenger's windows:
When the lock button is pushed in, the passen-
ger's windows cannot be operated.
To cancel the passenger's windows lock, push the
lock button again.
Passenger's window switch
The passenger's switch can control its correspond-
ing window.
When the passenger's windows lock button on the
NIC2132
driver's switch is pushed in, the passenger's switch
cannot be operated.
Automatic function
The automatic function is available for the switch
that has an mark on its surface.
The automatic function enables a window to fully
open or close without holding the switch down or
up.
To fully open the window, push the power window
switch down to the second detent and release the
switch. To fully close the window, pull the power
window switch up to the second detent and release
the switch. The switch does not have to be held dur-
ing window operation.
To stop the window open/close operation during
the automatic function, push down or pull up the
SIC4523Z
switch in opposite directions.
Auto-reverse function:
WARNING
There is a small distance just before the closed
position which cannot be detected. Make sure
that all passengers have their hands, etc. inside
the vehicle before closing the windows.
The auto-reverse function enables a window to au-
tomatically reverse when something is caught in the
window as it is closing by the automatic function.
When the control unit detects an obstacle, the win-
dow will be lowered immediately.
Depending on the environment or driving conditions,
the auto-reverse function may activate if an impact
or load similar to something being caught in the win-
dow occurs.
NIC2134
Instruments and controls
2-37