Renault ALASKAN 2017 Driver's Handbook Manual page 178

The following operations are identical to the audio
main operation of the Compact Disc (CD) opera-
tion. For details, see "Compact Disc (CD)
operation" earlier in this section.
•
List view
•
,
•
MIX (Random play)
•
RPT (Repeat track)
•
Folder browsing
button
While a track with recorded music information tags
(ID3–tags) is being played, the title of the played
track is displayed. If the tags are not provided then
a notification message is displayed.
When the button is pressed repeatedly,
further information about the track can be displayed
along with the track title as follows:
Track time → Artist name → Album title → Track
time
Track details:
A long press on the button, the screen
displays the song title, artist name, and album title.
After a few seconds it returns to the main display or
press briefly.
4-46
Display screen, heater and air conditioner, and audio system
BLUETOOTH® OPERATION
*: a device with bluetooth capabilities
Regulatory information
Bluetooth® is a trademark
m
owned by Bluetooth SIG, Inc.
CE statement
Hereby Yanfeng Visteon Automotive Electronics
Co., Ltd. declares that this system is in compliance
with the essential requirements and other relevant
provisions of Directive 1999/5/EC.
m
NOTE
The audio system only supports Bluetooth® de-
vices with AVRCP (Audio Video Remote Control
Profile) version 1.4 or earlier.
BLUETOOTH® settings
To pair a device, make sure the Bluetooth is
switched on and use the [Scan device] key or the
[Pair device] key For details, see "[Scan devices]"
later in this section.
Up to 5 different Bluetooth devices can be con-
nected. However, only one device can be used at a
time. If 5 different Bluetooth registered devices are
registered, a new device can only replace one of the
5 existing paired devices. Use [Del. device] key to
delete one of the existing paired devices. For de-
NAA1392
tails, see "[Pair device]" later in this section.
When successfully paired a notification message
will be displayed, then the audio system display will
return to the current audio source display. During
connection the following status icons will be dis-
played (top left of the display): Signal strength
( ), Battery status* (
( ).
*: If the low battery message comes on, the Blue-
tooth® device must be recharged soon.
The pairing procedure and operation may vary ac-
cording to device type and compatibility. See the
Bluetooth® owner's manual for further details.
NOTE
•
For device details, see your audio/mobile
phone Owner's Manual.
•
For assistance with the Bluetooth® audio/
mobile phone integration, please visit your lo-
cal approved dealer or qualified workshop.
) and Bluetooth "ON"