Power Outlets - Renault ALASKAN 2017 Driver's Handbook Manual

If the window does not close
automatically
If the power window automatic function (closing
only) does not operate properly, perform the follow-
ing procedure to initialise the power window sys-
tem.
1. With the engine running.
2. Close the door.
3. Open the window completely by operating the
power window switch.
4. Pull the power window switch and hold it to close
the window, and then hold the switch more than
3 seconds after the window is closed completely.
5. Release the power window switch. Operate the
window by the automatic function to confirm the
initialisation is complete.
If the power window automatic function does not
operate properly after performing the procedure
above, have your vehicle checked by an approved
dealer or qualified workshop.
2-38
Instruments and controls

POWER OUTLETS

The power outlet is used to power electrical acces-
sories.
Instrument panel (upper)
Instrument panel (lower)
Console box (where fitted)
j
JVI1023XZ
Use the cutout A between the lid and the console
box to route a connected power cable with the con-
sole box lid closed.
WARNING
Do not place any objects on the instrument panel.
Such objects may become dangerous projectiles
and cause injury if a supplemental air bag in-
flates (where fitted).
CAUTION
•
Do not leave a power cable on the instrument
NIC3097
panel in direct sunlight. The surface of the
instrument panel may become very hot result-
ing in damage to the power cable.
•
Do not put a liquid container near the power
outlet. Spilled contents may get into the power
outlet and can result in a malfunction.
•
The outlet and plug may be hot during or im-
mediately after use.
JVI1025XZ