Bonnet; Opening Bonnet; Closing Bonnet - Renault ALASKAN 2017 Driver's Handbook Manual

BONNET

WARNING
•
The bonnet must be closed and latched se-
curely before driving. Failure to do so could
cause the bonnet to fly open and result in an
accident.
•
Never open the bonnet if steam or smoke is
coming from the engine compartment to
avoid injury.

OPENING BONNET

1. Pull the bonnet lock release handle
below the instrument panel until the bonnet
springs up.
2. Locate the lever in between the bonnet and
grille and push the lever with your fingertips.
3. Raise the bonnet.
4. Remove the support rod and insert it into the slot
.
j
Hold the coated parts A when removing or re-
setting the support rod. Avoid direct contact with
the metal parts, as they may be hot immediately
after the engine has been stopped.

CLOSING BONNET

located 1. While supporting the bonnet, return the support
rod to its original position.
2. Slowly lower the bonnet to about 20 to 30 cm (8
to 12 in) above the bonnet lock, then let it drop.
3. Make sure it is securely latched.
Pre-driving checks and adjustments
NIC3101
3-17