Renault ALASKAN 2017 Driver's Handbook Manual page 187

General notes for USB use:
Refer to your device manufacturer's owner informa-
tion regarding the proper use and care of the de-
vice.
The audio system operates when the ignition switch
is placed in the ON or ACC position.
The USB port is located on the lower part of the
instrument panel. See "USB (Universal Serial Bus)
connection port" earlier in this section. Connect a
USB memory device into the connection port. The
USB memory device will be activated automatically.
USB main operation:
If another audio source is playing and a USB memory
device is inserted, push the AUX button until the
screen on the display changes to the USB memory
mode.
If the system has been turned off while the USB
memory device was playing, push the Power/VOL-
UME dial to restart the USB memory device.
Touch the name of a song on the screen to begin
playing that song.
USB screen operation:
While files on a USB memory device are playing,
the play pattern can be altered so that songs are
repeated or played randomly.
Mix:
Touching the [Mix] key on the screen while a USB
memory device is playing will alternate the random
play pattern as follows:
(Normal) → Random Folder → Random All → (Nor-
mal)
Repeat:
Touching the [Repeat] key on the screen while a
USB memory device is playing will alternate the re-
peat play pattern as follows:
(Normal) → Repeat Track → Repeat Folder → (Nor-
mal)
Browse:
Touch [Browse] key to display USB interface. Se-
lect the songs you wish to play by touching the item
on the screen.
Seek/Track buttons:
Push the Seek/Track (rewind) button while an audio
file on the USB memory device is playing to return
to the beginning of the current track. Push the but-
ton several times to skip backward several tracks.
Push the Seek/Track (fast forward) button while an
audio file on the USB memory device is playing to
advance one track. Push the button several times to
skip forward several tracks. if the last track on the
USB memory device is skipped, the first track of the
next folder is played.
Display screen, heater and air conditioner, and audio system
iPod player operation
Connecting iPod:
Connect the iPod to the USB connection port using
the USB cable that came with your iPod.
The USB port is located on the lower part of the
instrument panel. See "USB (Universal Serial Bus)
connection port" earlier in this section.
If your iPod supports charging via a USB connec-
tion, its battery will be charged while connected to
the vehicle with the ignition switch placed in the ON
or ACC position.
Compatibility:
The following models are compatible:
•
iPod 5th Generation (firmware version 1.2.3 or
later)
•
iPod Classic (firmware version 1.1.1 or later)
•
iPod Touch (firmware version 2.0.0 or later)*
•
iPod nano - 1st generation (firmware version
1.3.1 or later)
•
iPod nano - 2nd generation (firmware version
1.1.3 or later)
•
iPod nano - 3rd generation (firmware version
1.1.3 or later)
•
iPod nano - 4th generation (firmware version
1.0.4 or later)
•
iPod nano - 5th generation (firmware version
1.0.1 or later)
4-55