Two-Point Type Seat Belts (Where Fitted) - Renault ALASKAN 2017 Driver's Handbook Manual

Table of Contents

Advertisement

der. The belt should be away from your face and
neck, but not falling off your shoulder. Release the
button to lock the shoulder belt anchor into position.
Unfastening seat belts
Push the button on the buckle. The seat belt auto-
matically retracts.
Checking seat belt operation
Seat belt retractors are designed to lock seat belt
movement:
When the seat belt is pulled quickly from the
retractor.
When the vehicle slows down rapidly.
To increase your confidence in the seat belts, check
the operation by grasping the shoulder belt and pull-
ing forward quickly. The retractor should lock and
restrict further belt movement. If the retractor does
not lock during this check, contact an approved
dealer or qualified workshop immediately.
TWO-POINT TYPE SEAT BELTS
(where fitted)
Fastening seat belts
WARNING
Every person who drives or rides in this vehicle
should use a seat belt at all times.
1. Insert the tongue into the buckle with the
<CENTER> mark (where fitted) until you hear
and feel the latch engage.
2. Adjust the seat belt length. To shorten, hold the
tongue and pull the upper belt as illustrated
To lengthen, hold the tongue and pull the under
belt as illustrated
.
Safety — seats, seat belts and supplemental restraint system
SSS0448Z
3. Position the lap belt portion low and snug on the
hips as shown.
Unfastening seat belts
Push the button on the buckle.
SSS0541Z
.
SSS0450Z
1-13

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents