11.ANGLE MEASUREMENT
This section explains the procedures for basic angle measurement in Observation mode.
11.1 Measuring the Horizontal Angle between Two Points (Horizontal Angle 0°)
Use the "0SET" function to measure the included angle between two points. The horizontal angle can be set
to 0 at any direction.
PROCEDURE
1. Sight the first target as at right.
"10. TARGET SIGHTING AND MEASUREMENT"
2. In the first page of the OBS mode screen, press [0SET].
[0SET] will flash, so press [0SET] again.
The horizontal angle at the first target becomes 0°.
3. Sight the second target.
The displayed horizontal angle (HA-R) is the included angle
between two points.
OBS
SD
ZA
HA-R
MEAS
SHV
OBS
SD
ZA
HA-R
117
MEAS
SHV
34
PC
0
ppm
0
8 9
5 9
5 0
0
0 0
0 0
0SET
COORD
PC
0
ppm
0
89
59
50
32
20
0SET COORD