Pon Power Meter Of Mpn Module - ADInstruments AD1000 User Manual

16.3 PON Power Meter of MPN Module

Click Multi-func module to enter the interface as shown in Fig 16.2
Click the different modules shown on the top left screen to shift different module interfaces
among "PPM (PON Power Meter)", "SLS (Stabilized Laser Source)", "OPM (Optical Power
Meter)", "LTS (Loss Test)"
or above modules.
Click [
to start the measurement. Click [
AD1000 front panel to stop the measurement.
Measurement
setting area
Under "PPM", there are three setting interfaces: "General Setup", "Threshold Setting", and
Fig 16.1Multi-func Module
"Shift different module interfaces" only available when there are two
] button or Press "
The function icon turns red while switching on this function module.
Fig 16.2 PON Power Meter Interface of Multi-func Module
AD1000 User's Manual
"（Start/Stop）button on AD1000 front panel
]button or Re-Press " （ " Start/Stop） button on
MPN function area
Measurement
display
Operation
button area
- 87 -
area