Trace Processing; Prepare To Use Otdr; Connectors Instruction; Cleaning And Connecting To Optical Fiber - ADInstruments AD1000 User Manual

No.
16
17
different functional interfaces.

5.5 Trace Processing

The "OTDR TraceManager" software in MTP-Suite is for trace review and analysis
on PC after acquisition without connecting to AD1000.
Trace processing includes:
Ø Trace editing (Single trace, multi traces)
Ø Printing (Single trace printing, batch printing)
Ø Trace format conversion
Bi-directional averaging program (For singlemode fibers only) is available in
advanced versions to increase loss testing accuracy by averaging the measured
loss values of each event from both directions.

6 Prepare to Use OTDR

6.1 Connectors Instruction

The optical ports equipped on AD1000 are FC/PC (Interchangeable SC, ST)

6.2 Cleaning and Connecting to Optical Fiber

To insure measurement accuracy, please clean and connect fiber properly before
testing.
Icon
Table 5.1 Buttons and icons in OTDR main interface
Not all icons are displayed in one interface, they can be seen in
AD1000 User's Manual
Description
Return to previous menu
Return to previous menu
- 36 -