Table of Contents
Advertisement
u The
Prefix+Wavelength+Number, the number will increase automatically when
user save traces.
u If the name of the file to be saved already exists, system will promote a
warning message.
7.6 Open Saved Trace
Click [
] button on the right lower corner in OTDR interface to open saved trace
1. In single trace display mode, when opening a new trace, the
currently-displayed trace will be closed.
2. In Multi-trace display mode, user can open and display upto four traces at
the same time.
u Enable/disable
checking/unchecking "Multi-trace" in Display Option.
u User can open and view ".jpg" format trace though "File Explorer" on
{Program} label in AD1000 main interface. ".jpg" format trace can be also
loaded to PC for viewing.
7.7 Trace Viewing and Analysis Operation
User can zoom in/out trace, utilizing markers and marking points for trace
characterization including loss, attenuation, reflection and etc.
Zoom in/out trace:
Ø
In trace display area, draw selection frame from left upper corner to right
lower corner to zoom in trace.
Ø
Draw selection frame from right lower corner to left upper corner to zoom
out trace.
file
name
in
Multi-trace
AD1000 User's Manual
auto
naming
mode
display
mode
in
consists
of:
OTDR
Setup
by
- 41 -
Advertisement
Table of Contents
