Table of Contents
Advertisement
DTVLINK-T2 Operation Manual
5. Power Supply
5.1 Battery
DTVLINK-T2 uses built-in 12.6V 1.5AH Li-Polymer
battery and works over 5 when fully charged. When
the voltage of the battery drops below 11V, the
battery icon flashes in screen. Once the voltage of the
battery is lower than 10.6V, the instrument will shut
down automatically. The
charge time is about 3
hours.
NOTE：
1.The meter can be only charged by the charger
provided together with DTVLINK-T2.
2.When upgrading the software, please keep the
power on and don't interrupt the process, otherwise it
will cause the meter frozen.
3.Low temperature may reduce the capability of the
battery, but the battery will not be damaged.
4.Please replace the battery when its working hours
shorten distinctly.
95
Advertisement
Table of Contents
