Table of Contents
Advertisement
GENERAL
This product is a Safety Class 3 instrument. The protective features of this product
may be impaired if it is used in a manner not specified in the operation instrument.
Environmental Conditions
It is designed to operate at a maximum relative humidity of 95% and at altitudes of
up to 2000 meters. Refer to the specifications tables.
Before Applying Power
Verify that the product is set to match the available line voltage, the correct fuse is
installed, and all safety precautions are taken. Note AD1000's external markings
described under Symbols.
Do Not Operate in an Explosive Atmosphere
Do not operate AD1000 in the presence of flammable gases or fumes.
Do Not Remove AD1000 Cover
Operating personnel must not remove instrument covers. Component replacement
and internal adjustments must be made only by qualified service personnel.
Instrument that appears damaged or defective should be made inoperative and
secured against unintended operation until they can be repaired by qualified service
personnel.
Safety Terms Used in This Manual
The WARNING sign denotes a hazard. It calls attention to a
procedure, practice, or the like, which, if not correctly performed
or adhered to, could result in personnel injury. Do not proceed
beyond a WARNING sign until the indicated conditions are fully
understood and met.
The CAUTION sign denotes a hazard. It calls attention to an
AD1000 User's Manual
- 3 -
Advertisement
Table of Contents
