Table of Contents
Advertisement
11.13 Move the magnified trace window
After the trace magnified, the trace window will only display part of the trace. There
are two ways to move the trace window:
1.
Use stylus or mouse to operate in navigation window.
2.
Use 4 direction keys on the front panel to operate.
To move magnified trace window in the navigation window
In the navigation window, can see the position of current window on the whole
magnified trace. Click some place outside the magnified area in the navigation
window, trace window will move to the place correspondingly.
magnified window), the operation invalid
Use direction keys to move trace window
As to the magnified trace, press down the direction keys on the front panel, the trace
window will move correspondingly.
Click "
Ø
Ø
Click"
Ø
Click "
Ø
Click "
11.14 Operation of event options
Event sheet list all the events tested on the trace. Event can be defined as point
where optical transmission occurred change. Events are constituted loss which
In navigation window, if click the shadow region (display scope of
" , the trace window move upward
", the trace window move downward
", the trace window move towards the left
, the trace window move towards the right.
When display the whole trace, the trace window can't be moved.
AD1000 User's Manual
- 60 -
Advertisement
Table of Contents
