Electric Safety Announcements - ADInstruments AD1000 User Manual

Electric Safety Announcements

If need to assure instrument thorough outage, please pull up power line and take the
battery out
u AC/DC adaptor should be used only indoors.
u The ambient air of AD1000 place should be free flow.
u Any using of electric tools near inflammable gas or smog will be a big safety
threat.
u In order to avoid electric shock, please don't use instrument if there is
damage on any outside surface part(top cover, panel, etc)
u Only qualified professional staff can do electrified adjustment, maintenance
and repair to the operating instrument.
u
Even AD1000 power is cut off; the capacity in AD1000 might be
electrified in some time after that.
Battery: Battery of AD1000 is rechargeable lithium battery. If
unused for a long time, battery should be recharged before
use. If AD1000 is not in use for more than two months, it
should be recharged to maintain adequate battery volume. Do
not recharge batteries for more than 8 hours. Do not take
batteries out without technical staff's help. Do not expose
batteries to fire or intense heat. Do not open or mutilate
batteries. Avoid touching the electrolyte in the batteries, which
is corrosive and may cause injuries to eyes, skin or damage to
clothes.
External Power: AD1000 supports external power. Power
requirements: DC 24V/4A.
AD1000 User's Manual
- 5 -