Test With Otdr; Otdr Quick Test - ADInstruments AD1000 User Manual

Connecting fiber to OTDR port is tool-free.
Ø Please refer to "Maintenance and Calibration" for optical port and connector
cleaning.
Ø Clean connectors and check if fiber connector type is FC/PC
Ø Connect fiber to OTDR port.
ensure personal safety.
u
When testing with OTDR, unless connected to specific optical port, please
make sure there is no working laser in the fiber under test or it may cause
incorrect result and even permanent damage to test instrument.
u
Please not screw connectors too tight or it may damage fiber and optical
port.

7 Test with OTDR

7.1 OTDR Quick Test

7.1.1 Check the connection between fiber and OTDR optical port, make sure it's
well connected.
7.1.2 Click
7.1.3 Click
Fig 7.1 shows the interface after trace acquisition:
Improperly connected fiber may cause serious loss and reflection.
Please refer to Safety Instructions of this manual before testing to
icon or press
icon or press
AD1000 User's Manual
button to start testing.
button to stop testing.
- 37 -