ADInstruments AD1000 User Manual page 75

3. Zoom the trace to view the event clearly, move Marker A to the end of
linear part of the trace before the event;
4. Move the first marking point to the beginning of the linear part of the trace
before the event;
5. Move the second marking point to the end of the linear part of the trace
before the event;
6. Move the third marking point to the beginning of the linear part of the trace
after the event;
7. Move the fourth marking point to the end of the linear part of the trace after
the event;
u The marking points on the left of the active marker cannot be moved the
right and vice versa.
u The loss showed in the Event List is measured by 5-point method.
Fig. 12.4 Measure insertion loss in 5-point method
AD1000 User's Manual
- 75 -