Analysis Detecting Threshold Configuration; Set Analysis Detecting Threshold - ADInstruments AD1000 User Manual

Multifunctional test platform

Table of Contents

3. Press "Yes" when the program hint or press "No" don't delete event and go

back to main interface.

11.15 Analysis detecting threshold configuration

In order to optimize the event detection, user can set follow analysis detecting

threshold

Ø

Change non reflection threshold (splice loss threshold): It can display or

hide small non reflection event.

Ø

Change the reflection threshold (Reflection threshold): It can hide the fake

reflection event caused by noise, turn the harmless reflection event to loss

event or check the event which may cause damage to network and other

optical fiber equipment.

Ø

Change the finish threshold( optical fiber end threshold): It can analyze the

important loss event(like breakpoint) and stop the event analysis after that

event

"Auto" mode and "Manual" mode can use these thresholds.

1. own [

surface.

Fig 11.7 Delete Event

] in the button area which in the lower right area to enter setting

AD1000 User's Manual

- 66 -

Table of Contents